Flush Mount Enclosure - HEATSTRIP Max THX2400UK Manuel D'utilisation, D'installation Et D'entretien

Flush mount enclosure

The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP Max into a ceiling. They are available
for all HEATSTRIP Max models, and are supplied as a one-piece unit for mounting of heaters. Flush mounting can
be used with plaster or wood lined ceiling materials.
An ideal mounting height is 2.4m-3.0m, with a maximum ceiling height of 3.5m in an outdoor environment. Maxi-
mum mounting heights should be strictly followed, otherwise the performance of the units may be reduced.
The facia of the enclosure is manufactured from 316 Stainless Steel and the rear casing is black zinc coated steel.
Please refer to the Installation Manual for more detailed installation information.
SUITABLE FOR MOD-
ELS
THX2400
THX3600
14
PART No HOLE CUTOUT
DIMENSIONS (mm)
THXAC-030 935 x 250
THXAC-031 1260 x 250
OVERALL WEIGHT
DIMENSIONS (mm)
980 x 180 x 290
1310 x 180 x 290
(kg)
5
6