Standard Mounting Brackets - HEATSTRIP Max THX2400UK Manuel D'utilisation, D'installation Et D'entretien

Standard mounting brackets

The HEATSTRIP Max comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling or
wall mount, and come with preset angle options of parallel, 22.5° and 45°.
The flexible standard mounting bracket can be turned 90 degrees to mount onto a beam, it can also be used to suspend
with chains.
The brackets need to be mounted onto a secure frame or wall with a minimum distance between the two brackets. The
minimum distance ("B") for each model is listed in the table below.
When completing the installation, ensure all screws are tight and unit is secure.
Note: When suspension mounting, chains are not included.
BEAM MOUNTING
CEILING
CEILING MOUNTING
SUSPENSION MOUNTING
WALL MOUNTING
170
Standard Mounting Bracket
PART No PACKAGED WEIGHT (kg) MATERIALS
DIMENSIONS (mm)
ZBRAK-85 100 x 100 x 25 0.5 316 SS
12