Selection Guide - HEATSTRIP Max THX2400UK Manuel D'utilisation, D'installation Et D'entretien

Selection guide

Prior to selecting the exact model and quantity required for your application, please ensure the correct range of Heatstrip
heaters is being used.
Below is an overview of the Heatstrip options.
HEATSTRIP Design (THH models) is a premium high temperature heater and is primarily used for outdoor rooms
where there is 1,2 3 or 4 enclosed sides, with an ideal mounting height of 2.1 m to 2.7m. Ideal for hard to heat indoor ap-
plications or moist environments where an IP55 rating is required.
HEATSTRIP Max (THX models) is an ultra high temperature heater used for uncovered or open areas with a
mounting height of 2.4 m to 3.5m. Also suitable for difficult indoor environments such as showrooms, production lines,
warehouses etc.
HEATSTRIP Indoor (THS models) is a medium intensity heater used for protected indoor applications, such as
sunrooms, school classrooms, halls, gymnasiums etc.
General recommendations for HEATSTRIP Max:

Ideal mounting height: 2.4m to 3.5m. Maximum is 3.5m in a protected outdoor environment.

Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table)

Based on the radiant footprint of the previous page, for a protected outdoor area, a minimum of 250W/m2 is re-
quired. For indoor spot heating, a minimum heating capacity of 150W/m2 is recommended.
The below table outlines the coverage of each
For example, for an outdoor area that is protected from prevailing winds by walls, café blinds etc, Model THX2400 will
cover 9.5m2 and Model THX3600 will cover 14.5m2.
MODEL INDOOR PROTECTED (m2)
THX2400
THX3600
8
HEATSTRIP Max model (in m2), based on 3 different scenarios.
OUTDOOR ENCLOSED (m2)
16
24
OUTDOOR EXPOSED (m2)
9.5
14.5
6
9