FORGE ADOUR Innova Série Notice D'utilisation page 24

Direction for use
Point to be checked in case of malfunction :
No inflow of gas :
1. Check that the gas supply is open (bottle or wall valve)
2. Check th contents of the gas bottle (if using butane/propane gas).
3. Check that the pressure relief valve has been properly primed (refer to the
instructions provided by the relief valve manufacturer).
The burner does nit light up :
1. Piezzo starter failure or cable disconnected.
2. Dirty burner or cloggerd injector.
3. Absence of gas or insifficient pressure.
The burner keeps going out :
1. Thermocouple failure or improperly positioned.
2. Unsuitable weather conditions.
No spark on lighting :
1. Check the polarity of the battery and the positioning of the spring. Replace
the battery.
If your ignition system is not working : you can light your plancha by inserting a long
through the gap between the plate and the housing on either side of your plancha.
Contact the customer support department.
For optimal cooking, it is recommended to take the food out of the refrigerator one hour
ahead of time, and to make sure that it is not wet.
Innova 65 & 80
24
Innova 80 only