FORGE ADOUR Innova Série Notice D'utilisation page 22

Precautions for use
• Be sure to replace the container away
from any source of ignition.
• Do not plug the vents and regulary check
that every that they are clean to allow for
proper circulation of air to the burner.
• Do not modify the appliance, contact the
manufacturer or your retailer.
• Before using yout FORGE ADOUR plancha
after a period of storage and/or inactivity,
check is carefully in order to detect any
gas leak and/or clogging of the burners.
DO NOT CUT THE FOOD WITH A KNIFE
DIRECTLY ON THE COOKING PLATE.
Before each use, we recommend that you
preheat your plancha for at least 10 minutes;
with the switch on the high flame positions.
22
Directions for use
Lighting and operation of the plancha
Before lighting your plancha, check that all
the conditions stated in the "PRECAUTIONS
FOR USE" section are met.
• Check that the control switch is on the « 0
» position as shown (Fig.1). Open the gas
supply (bottle for Butane/Propane, wall
valve for natural gas).
Control switch
• Rotate the control switch
counterclockwise while holding it down.
(Fig 2)
Control switch
• While still holdong the control swich down,
keep pressing on the ignition to generate
the sparks required for lighting of the
burners.
• Keep the control switch down for at least 5
seconds afer lighting the burner.
Fig.1
Piezzo
Piezzo Fig.2