Disposal Of The Packaging; Operation - SilverCrest SEMK 105 A1 Mode D'emploi

Disposal of the packaging

The packaging protects the appliance from damage during carriage .
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable .
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated . Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations .
Dispose of the packaging in an environmentally friendly manner .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites .
NOTE
If possible, keep the original packaging during the warranty period so
►
that the appliance can be properly packed for returning in the event of a
warranty claim .

Operation

Before starting to use the appliance, ensure that ...
the appliance, power plug and mains cable
–
all packaging materials and protective films have been removed from
–
the appliance .
Clean all parts of the appliance as described in the section entitled
♦
"Cleaning and care" .
Insert the plug into a suitable mains power socket . The control lamp
♦
flashes green .
The appliance is now ready for use .
CAUTION! PROPERTY DAMAGE!
If you have moved the appliance, wait around 2 hours before using it again .
►
Make sure that the ambient temperature is between 10 and 32 °C .
►
■ 24 │ GB │ IE
are in perfect condition and ...
SEMK 105 A1