shark Rocket HV320EU Notice D'utilisation page 35

MAINTENANCE CHECK FOR BLOCKAGES
REMOVE AND INSPECT:
Make sure unit is off
and cord unplugged. 1 HANDHELD AND TUBE
a Remove the tube from the handheld portion and check all dust cup intake openings.
b Remove the floor nozzle from the tube and check the tube for blockages.
2 BOTTOM OF FLOOR NOZZLE
c Use a coin to unlock the three locks on the bottom of the floor nozzle.
d A portion of the base is removable to allow for better access to the brush roll and exposure to the airway. Shine a flashlight from the bottom to check for
possible blockage in the airway.
e Remove any string, carpet fibres or hair that may be wrapped around the brush roll. There is a groove on the brush bar that allows a pair of scissors to cut
across it to loosen up the debris.
f To reassemble, replace base by lining it up along the front of the nozzle. Push down to snap into place. Lock the three locks.
c
c
a
d
c
b
e
b
f
3 5