Preparation - Mesto 3270FO Mode D'emploi

EN
+
cked. Unintentional spraying is prevented after locking (Fig. 12a)
(Fig. 12a and 12b)
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.

Preparation

Observe the instructions in the section entitled „Safety".
The device must be in an upright position.
into the tank.
1. Pull up the red button on the piston pressure gauge [7] until all excess pressure is
released from the tank (Fig. 3)
2. Press the piston rod with handle [9] down and turn into the lock.
3. Unscrew the pump [2] from the tank. (Fig. 6)
4. Add the liquid to the tank [1]. (Fig. 7)
5. Where appropriate, add cleaning agent.
7. Screw the pump [2] into the tank. (Fig. 8)
8. Press the piston rod with handle [9] down and turn out of the lock.
9. Generate the desired pressure in the tank (Fig. 10).
+
10. Press the piston rod with handle [9] down and turn into the lock.
(Fig. 7)
(Fig. 9)
16
ENGLISH
-