TechniSat DIGITRADIO 110 IRr Mode D'emploi page 5

8. Never unplug your unit by pulling on the power cord. Always grasp the plug firmly and pull straight out
from the outlet.
9. Repair or replace all electric service cords that have become frayed or otherwise damaged immediately.
Do not use a cord that shows cracks or abrasion damage along its length, the plug, or the connector
end.
10. To prevent fire or shock hazard, do not use this plug with an extension cord or other outlet unless the
blades can be fully inserted to prevent blade exposure.
11. During lightning or raining days, unplug the unit for additional protection during thunderstorms or when
the unit is not used for prolonged periods. This will prevent damage to the unit from lightning and power
surges.
12. Do not attempt to carry out any service work yourself. By opening or removing the cabinet, you may
be exposed to dangerous voltage or other hazards. Any service work should be carried out by qualified
technicians.
13. The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so,
simply reset the product to resume normal operation by following the instruction manual. In case the
function could not resume, please use the product in other location.
14. The means of disconnecting this apparatus from the mains supply is plug of adapter. The disconnect
device shall remain readily operable.
15. The battery of remote control shall not be exposed to excessive heat such as sunshine, fire or the like.
16. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
17. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit switched
on while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house.
Switch it off and disconnect the mains plug from the mains socket.
EN
FR
IT
NL
PL
CZ
SK
5