Cleaning - Medical Computer Systems MCScap Manuel De Maintenance

EEG accessories MCScap
User manual

CLEANING

Electrodes and cap after use should be immediately cleared of gel while it has not
dried up! A dried gel makes it difficult to achieve optimal electrode impedance and
prevents quality recording of the EEG.
Electrode caps CLINIC, SLEEP, PROFESSIONAL recommended to be cleaned, not
removing electrodes from textile cap. For cleaning electrode caps BASE and
ELECTRODE SET it is recommended to remove electrodes MCScap- E from fixing
rings.
Do not use for cleaning aggressive substances and shampoos.
Avoid to put the connector in fluid!
1. Disconnect the product from the amplifier.
2. Wash the product in water, using gentle cleaning agent and brush for cleaning
electrodes.
3. Rinse the product under clean running water or distilled water.
4. Rinse with clean water and dry on a towel or hang.
See video Cleaning of EEG acessories on www.mcscap.com.
MCS.MC000000-63-EU-EN. Rev. 5.2 / 2021-01-26
Page 13 of 20