Belkin N Manuel De L'utilisateur page 86

Troubleshooting Troubleshooting
The Setup Assistant completed, but my web browser
•
doesn't work.
I am unable to connect to the Internet. The "modem" LED on
•
my Router is blinking, and the "internet" LED is solid.
1.
If the "modem" LED is blinking, and the "internet" LED is solid,
but you are unable to access the Internet, there may be third-
party firewall software installed on the computer attempting to
access the Internet. Examples of third-party firewall software are
ZoneAlarm, BlackICE PC Protection, McAfee Personal Firewall,
and Norton Personal Firewall.
2.
If you do have firewall software installed on your computer,
please make sure that you properly configure it. You can
determine if the firewall software is preventing Internet access by
temporarily turning it off. If, while the firewall is disabled, Internet
access works properly, you will need to change the firewall
settings to function properly when it is turned on.
3.
Please refer to the instructions provided by the publisher of your
firewall software for instructions on configuring the firewall to
allow Internet access.
If you are still unable to access the Internet after disabling any firewall
software, please contact Belkin Technical Support.
84 84