English
• We recommend that you clean your
electric power tool immediately after
each use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap.
Do not use any cleaning or solvent materi-
als; these can attack the device's plastic
components. Make sure that no water can
get inside the electric power tool.
10. Storing
• Clean the device before storing it.
• Before storing check all parts for
damages.
• Store the device indoors in dry place
that is protected from dust and dirt and
extreme temperatures.
11. Technical data
Rated voltage . . . . . . . . . . . . . 18 V DC
Motor watts . . . . . . . . . . . . . . . 140 W
Max airflow . . . . . . . . . . . . . . . . 11 l/s
Vacuity . . . . . . . . . . . . . . . . . ≥9 kPa
Air watts . . . . . . . . . . . . . . . . . 30 W
Max. dust capacity . . . . . . . . . . . . . 8 l
Tank capacity . . . . . . . . . . . . . . . .12 l
Dry capacity . . . . . . . . . . . . . . . . . 8 l
Sound level . . . . . . . . . . . . . . 75 dB(A)
Filter . . . . . . . . . . . . . . . . . . . . . . F7
Dimensions . . . . . . . . . 34 × 24 × 24 cm
Net weight (without battery) . . . . . 2390 g
* Sound and vibration emissions may differ
from the declared values during use
depending on the ways in which the tool is
used.
6
Vibration level
11.1
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
• using the tool for different applications,
or with different or poorly maintained
accessories, may significantly increase
the exposure level
• the times when the tool is switched off
or when it is running but not actually
doing the job, may significantly reduce
the exposure level.
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
12. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council. The product and the user
manual may be subject to changes. Techni-
cal data may be changed without prior
notice.
Batteries
12.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of
explosion.