supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
Scope of delivery
2.1
The device is designed to be used with the
rechargeable battery type 2.0Ah BT-CLB001
(Art. No.7062517) or with the rechargeable
battery type 4.0 Ah BT-CLB002 (Art. No.
7062518). Please note that the rechargeable
battery and a charging unit are not included
in delivery.
ATTENTION! Danger of damage to the
device and battery!
If the device is operated with an unsuitable
battery, both the device and the battery may
be damaged. Only operate the device with
the specified rechargeable battery.
For charging the rechargeable battery, the
charging unit Quick Charger type
BT-CLC001 (Art. No. 7062519) is required.
3. Before first use
Remove the device and all additional parts
out of the packaging. Check all parts for
damage in transit and do not use a dam-
aged device. Keep packaging materials out
of reach of children. There is risk of
suffocation!
4. Contents of packing
1× Cordless ash vacuum cleaner
1× 1 m fire resistant hose
1× 23 cm aluminium tube
1× Filter with metal mesh
1× Aluminium flat nozzle
1× Instruction manual
5. Intended use
The ash vacuum is intended to vacuum
ashes out of fireplaces, stoves, vacuums
and other small furnaces.
WARNING: Only vacuum dry and cold
materials.
6. Select the filter
Only use the filter that has been specially
developed for this machine. This has an
order number: 7063529.
7. Emptying the ash tank and
cleaning the filter
Clean the filter after each use. Empty the
ash tank when the appliance loses its suc-
tion power. Please note that cold ashes
become encrusted on the filter during vacu-
uming. This will block the filter and the
motor will not be properly aired.
First switch off the ash vacuum and
7.1
remove the battery before opening the
ash tank.
Tap the filter carefully to remove the ash
7.2
from the surface. Preferably clean the
filter outdoors by using a hand broom,
compressed air or similar.
8. Switching ON and OFF
Before use the ash vacuum must be
8.1
equipped with a sufficiently charged
battery.
Switch on the ash vacuum by pressing
8.2
the ON/OFF button (4).
To switch off the appliance, press the
8.3
button again. Always pull the power
plug from mains when not using the
appliance.
When using the suction hose make sure the
hose is not bent. This will damage the suc-
tion hose and the ash vacuum will lose its
suction power. The suction hose must be
placed that way so that it forms a natural
curve while sucking.
9. Maintenance and cleaning
WARNING: Always disconnect from the
mains power supply, before carrying out any
maintenance/ cleaning of the charger.
Remove the battery before carrying out any
maintenance/ cleaning of the tool.
Maintenance
9.1
There are no inner parts of the tool which
need maintenance.
Cleaning
9.2
• Keep safety devices, ventilation open-
ings and the motor housing as free as
possible from dirt and dust. Rub the
electric power tool with a clean cloth or
blow over it with low pressure com-
pressed air.
English
5