NOVARDEN NRL630 Mode D'emploi page 24

EN
Troubleshooting
Abnormal
E9
charging status.
E10 Robot overload.
Tilt sensor
E11
activated.
The wheels have
E12 no grip and sink
into the lawn.
Battery charging connector
malfunctioning.
PCB self-test is abnormal.
The robot mower is on a
slope over 20°.
1. One of the front
wheels spins for
30 seconds along the
perimeter cable.
2. During mowing,
the wheels skid for
350 seconds.
22
Contact the NOVARDEN
customer services
department.
Level out the slope, then
place the robot mower
less than a metre away
from the perimeter cable
and restart it.
Place the robot mower
less than a metre away
from the perimeter cable
and restart it.