SOLAC More Brave Mode D'emploi page 7

Retract the cable by pressing the roller cable
•
button and guide the cable into the appliance.
Clean the appliance.
•
CARRY HANDLE/S:
This appliance has a handle on the upper part
•
of the body, which facilitates comfortable trans-
portation
PARKING POSITION:
This appliance has its own parking position for
•
comfortable and straightforward storage.
To make use of the horizontal parking hook the
•
head's hook onto the hook that is to be found
on the lower part of the appliance (Fig.2).
CLEANING
Disconnect the appliance from the mains and
•
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
•
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
•
or base pH such as bleach, or abrasive pro-
ducts, for cleaning the appliance.
Never submerge the appliance in water or any
•
other liquid or place it under running water.
EMPTYING THE DUST BOX
Empty the dust box when it is full (observation
•
facilitated by transparent windows), or when
vacuuming power is notably reduced.
Disconnect the hose from the vacuum clea-
•
ners air intake.
Disconnect the dust box from the appliance
•
(Fig.3).
Open the lid of the dust box and empty the
•
contents into the appropriate waste disposal
receptacle.
Check the condition of the motor filter.
•
Close the lid of the dust box.
•
Attach the dust box to the appliance.
•
Connect the hose to the vacuum cleaners air
•
intake.
CHANGING THE FILTERS:
Motor filter, it is advisable to be changed at
•
least once a year or every 50 hours of the
appliance's use.
Air outlet HEPA filter (high efficiency air filter
•
that efficiently retains spores, ash, sawdust,
pollen...), it is advisable to change it a least
once a year or after every 100 hours of use.
TO REMOVE THE FILTERS:
MOTOR FILTER:
Disconnect the dust box from the appliance
•
(Fig.3).
Open the cover that contains the filter. (Fig.4).
•
Remove the filter from its housing (Fig.5).
•
OUTLET FILTER:
Open the air outlet grille located on the rear
•
of the vacuum cleaner. To access the filter.
(Fig.6).
Remove the filter from its housing
•
To reassemble the filter, proceed with the abo-
•
ve instructions, in reverse order.
SUPPLIES
Supplies can be acquired from distributors
•
and authorised establishments (such as filters,
etc...) for your appliance model.
Always use original supplies, designed specifi-
•
cally for your appliance model.
These supplies are available in specialist
•
shops.
EN