Application; Safety Instructions; Faults And Damage - Ecom Lite-Ex PL 30e Notice D'utilisation

1. Application

The Lite-Ex PL 30e is a LED- torch / flashlight (according directive 2014/34/
EU, ATEX) for industrial use in potentially explosive areas classified as zone
0 and 20 (in accordance with directive 1999/92/EC) and the IECEx System.

2. Safety instructions

These operating instructions contain information and safety regulations
which are to be observed without fail for safe operation in the described
conditions. Non-observance of this information and these instructions can
have serious consequences or it may violate regulations.
Please read these operating instructions carefully before starting to use
the unit! In case of any doubt (in the form of translation or printing errors)
the English language operating instructions shall apply.

3. Faults and damage

If there is any reason to suspect that the safety of the unit has been impaired,
it must be withdrawn from use and removed immediately from the Ex-area.
Measures must be taken to prevent it from being restarted accidentally.
We recommend that the unit is returned to the manufacturer for inspection.
The safety of the unit may be compromised, if, for example:
• there is visible damage to the housing.
• the unit has been subjected to excessive loads.
• the unit has been improperly stored.
• the unit has been damaged in transit.
• unit markings or inscriptions are illegible.
• malfunctions occur.
• permitted limit values have been exceeded.
4