Adding Device - Danfoss Link HR Guide D'installation

Installation Guide
Installation
L
N

Adding device

Adding Danfoss Link™ HR to a system is
made from the Danfoss Link™ CC Central
Controller .
When adding, press the install but-
ton until the LED gives a fast
green flash .
For further information,
see the Danfoss Link™ CC
instruction manual:
Configuration 6:
Adding devices.
VISGX45X
Danfoss Link™ HR
1 . Danfoss Link™ HR is to be mounted
into a build in box in the wall .
2 . It is recommended not to install
the HR in a metal box due to the
possible disturbance of the radio
communication .
3 . Connect the Danfoss Link™ HR ac-
cording to the connection diagram .
1.
© Danfoss 04/2011
2.
Max. 1 m
7
GB