Timer Touch Control - Bertazzoni PROFS24XV Instructions D'installation Et Guide D'utilisation Et D'entretien

Timer touch control

Setting the clock
"Auto" and "0:00" will start flashing
when the unit is switched on for the first
time. To set the clock, press the central
button for about 3 seconds. When
appears, press "+" or "-" to set the
correct time.
Wait until a beep tells you that the clock
has been set (figure 1).
To set the time at a later stage, press
"+" and "-" together for 3 seconds and
then adjust the clock as
above.
Minute counter
As this minute counter does not control
the oven, when it finishes counting the
oven will continue to work.
To set, press the central button for 3
seconds until
Press "+" and "-" to set the required
time.
To set the minute counter at a later
stage, press the central button for 3
seconds and adjust as
above.
The minute counter beeps when it
Fig. 1
described
Fig. 2
appears (figure 2).
described
11
finishes counting. To disable it, press
any button.
Cooking time
This is a semi-automatic cooking
function. It can be used to set cooking
times.
Press the central button for 3 seconds.
Then press it again until "dur" appears
(figure 3). Press "+" and "-" to set the
required cooking time.
End of cooking time
The end of cooking time can also be
set.
Press the central button for 3 seconds.
Press the central
consecutively and wait for "End" to
appear (figure 4). Press "+" and "-" to
set the required end of cooking time.
The oven will work in the set mode and
at the set temperature until the end of
cooking time.
11
GB
Fig. 3
Fig. 4
button twice