Eureka 440 Série Guide Du Propriétaire page 12

M
N
12
ENGLISH
Brushroll
Note: Turn off the power switch
cord
A Long hair, thread, string, etc. can wrap around the revolving brush-
roll and result in reduced performance.
To check brushroll for debris turn cleaner nozzle over and inspect
for wrapped matter. Use scissors to cut debris from brushroll.
How to Check for Blockages
Note: Turn off switch and unplug the electrical cord before
checking for blockages.
If suction performance diminishes, check for blockages in suction
path.
Step 1: Remove dust cup
Step 2: Inspect for blockages inside hole area
A opening. Use tool or coat hanger to remove blockage
(Fig. 8).
Step 3: Reinstall dust cup
FIG. 8 Step 4: Flip vacuum over and inspect dirt channel in brushroll
area. Open access door by pulling back on access door
latch
Remove any blockages with tool or coat hanger. Close
access door.
FIG. 9
E and unplug the electrical
K before inspecting brushroll.
G
and set aside.
G .
N and lifting up (Fig. 9), check for blockage.
M at base of body