Construction; Stainless Steel; Application - Siemens Milltronics easy aimer 2 Instructions D'utilisation

Construction

(exposed materials)
•

304 stainless steel

Coupling Option
Coupling Size
- 1" BSP
- 1½" BSP
Cable Gland and Coupling Option
Cable gland
Size
and coupling
- M20

Application

In solids applications, mount the transducer so it is aimed toward the low level draw
point. The transducer can be revolved through 360° and angled at 0 to 27° off vertical.
Position the Easy Aimer so that the transducer's sound path is unobstructed and away
from fill points.
The Easy Aimer is capable of withstanding 15 psi (North America) or 0.5 bar (Europe)
gauge pressure with proper installation.
Mount the Easy Aimer to an access plate with welded studs or to a flange to isolate the
mounting holes from the pressurized environment.
Page 14
Material
- stainless steel
Material
- stainless steel
Easy Aimer 304 – INSTRUCTION MANUAL
Where used
XPS-10, XPS-15, XCT-8, XCT-12
XPS-30, XPS-40
Where used
cable gland and coupling connecting to
BSP conduit.
7ML19985HG62