Hand Blender; Safety Instructions - ECG RM 993 Mode D'emploi

HAND BLENDER

SAFETY INSTRUCTIONS

Read carefully and save for future use!
Warning: The safety measures and instructions, contained in this
manual, do not include all conditions and situations possible. The user
must understand that common sense, caution and care are factors
that cannot be integrated into any product. Therefore, these factors
shall be ensured by the user/s using and operating this appliance. We
are not liable for damages caused during shipping, by incorrect use,
voltage fluctuation or the modification or adjustment of any part of the
appliance.
GB
To protect against a risk of fire or electric shock, basic precautions shall
be taken while using electrical appliances, including the following:
1. Make sure the voltage in your outlet corresponds to the voltage
provided on the appliance label and that the socket is properly
grounded. The outlet must be installed according to valid safety
instructions.
2. Do not operate blender with a damaged cord. All repairs including
cord replacements shall be performed by a professional service
centre! Do not remove protective covers of the appliance, risk
of electric shock!
3. Protect the appliance against direct contact with water and other
liquids, to prevent potential electric shock.
4. Do not operate the immersion blender outdoors or in a moist
environment and do not touch the cord or appliance with wet
hands. Risk of electric shock.
5. Close supervision is necessary for operating the immersion blender
near children!
6. Do not leave the immersion blender running unattended.
7. Hair, fingers or parts of clothing shall be kept far enough from the
moving parts of the appliance. Do not place any tools or hands into
the bowl while blending, Risk of injury or damaging the appliance.
You may use the spatula only if the blender is switched off.
30