1Decommissioning - Unimec FG 33-06 Manuel D'utilisation

machine . No power
Not working traction on one
or both sides.
The machine does not
proceed straight.
Lack of lifting power bucket
The motor is shut down in a
steep gradients (up to 25°)
10 DECOMMISSIONING
If the machine is to remain unused for a long period of time (e.g. vacation period), then you should follow a few steps:
1. thoroughly clean the entire machine, remove dust deposits and away all the dirt.
2. wash the inside of the tank.
3. remove any deposits of concrete, without hitting the car with hard objects like hammers or shovels.
4. Lubricate all organs subject to seizure and mechanical components subjected to oxidation.
5. place the appliance in dry and well aerated, otherwise use a nylon cover.
1 Disassembly/dismantling
Before any dismantling or disassembly, proceed to disconnect the battery.
• To disconnect all electrical and mechanical components;
• Remove the motor.
• Remove the hydraulic distributor parts, tubes, cylinders, pump.
• Disconnect and remove all other mechanical components and tracks.
2 Demolition
Materials that make up the machine are:
• Painted steel and other metal components.
• Plastic materials.
• Hydraulic Materials
• Cables, motors, battery and electrical components.
It is recommended to dispose of these materials and not disperdendoli in the environment, but send them to special
collection centres and
disposal, according to the legislation in force.
Manuale di Istruzioni per l'uso e ricambi
• Oil filter clogged.
• Lowering of power engine.
• Pump or Failure of the joint.
• Lowering of the pressure regulating valve.
• Faulty Distributor.
A foreign body, like a stone, got stuck.
• Malfunction of the traction engine.
• Something is stuck.
• Girdle Voltage different.
• Inefficient Pump
• Inefficient shifting Levers.
• Drive motor failure.
Lack of hydraulic oil.
• Lowering valve pressure adjustment.
• Damaged Distributor.
• Hydraulic cylinder Defect
•
The sensor on the engine experienced a lack of oil
Rev. 5 del 10/11/15
MINITRASPORTER FG 33 06 COPIA
• Carry out maintenance oil filter.
• Carry out maintenance air filter and
check the power supply.
• Ask for assistance intervention.
• Ask for assistance intervention.
• Ask for assistance intervention
Remove jammed material.
• Ask for assistance intervention
Remove foreign material.
• Adjust the tensions on both sides.
• Ask for assistance intervention.
• Ask for assistance intervention.
• Ask for assistance intervention.
Fill up to the level.
• Ask for assistance intervention.
• Ask for assistance intervention.
• Ask for assistance intervention.
•
Contact the manufacturer's
assistance service of the
endothermic engine
.
Pagina 19 di 45