Cleaning And Care - Klarstein WONDERWALL EARTH Mode D'emploi

Switching operating modes
When setting the weekly timer mode and the clock, the power button
The radiation rate can be adjusted by pressing the up/down buttons
settings are then saved. When the weekly timer has been set for all weekdays (Monday
– Sunday), the weekly timer is activated. Otherwise the appliance runs in real time
mode.
When setting the weekly timer, press the On/Off button
– timer on – timer on – timer off – timer off. When setting the clock, press the power
button to set the week, hour and minute with cyclic flashing.
When the appliance is in operation, the hours (long display duration) and the minutes
(short display duration) are displayed alternately.
Window open detection
• If you open the doors and windows or turn on the ventilation in the room while
heating, the appliance will judge that the appliance does not need to heat. If the
room temperature drops continuously by more than 3 °C, the heating equipment
switches off automatically in order to save energy. If you want the heating process
to continue, close all doors and windows and switch the appliance on again so that
it will enter the working state and continue heating.
Off
• If you do not use the appliance for a long period of time, switch off the appliance
and unplug the power cord from the wall outlet.

CLEANING AND CARE

• Before cleaning, switch off the appliance by setting the power switch to the OFF
position ("O") and let the appliance cool down.
• Unplug the appliance from the socket.
• The outside can be cleaned by wiping it over with a soft damp cloth and then let it
dry.
• Do not use abrasive cleaning powders or furniture polish, as this can damage the
surface finish.
• To release the heater from the wall, for cleaning or redecoration, just open the
screw bolt cap and unscrew the bolts to take off from the wall.
is the shift key.
or . The
to set the temperature
EN
23