Operation - Klarstein WONDERWALL EARTH Mode D'emploi

OPERATION

Commissioning
Insert the plug of the appliance into the power outlet and switch on the appliance by
setting the power switch to the „I" position.
On
Switch on the appliance by pressing the power button
The clock defaults to "12:00" (hour and minute replacement display), and the weekly
mode defaults to WEEK "1" (Monday).
Clock time and weekday settings
Long press mode button
setting mode (WEEK "1"). Press the up/down buttons
to the state of the WEEK of the day (on Saturday, for example, you can adjust to WEEK
"6"). At this time, press the power button
buttons or to set the clock to the current hour. Then press the power button
again, the minute display is flashing. Press the up/down buttons
minutes to the current minutes.
Example (Saturday, 9:30): After setting WEEK "6" for Saturday, press the power
button , the clock is flashing. Press the up/down buttons
clock to "9", then the hour display continues flashing. Press the power button
and then the up/down buttons
display continues flashing.
Press the power button
hour display appears for 5 seconds, the minute display for 3 seconds.
Temperature settings
Press the mode button
display is flashing. Press the up/down buttons
5 seconds after setting the "ST" temperature, the setting is automatically saved. The
indicator WEEK "6" is always on. At this time the heater is in real-time mode.
Weekly timer settings
1. Press the mode button
flashing. Press the up/down buttons
the temperature of "ST", press the mode button
temperature setting "ST" and WEEK "6" are not locked) to enter the WEEK timer
mode.
for 3 seconds to enter the clock setting mode and weekday
the clock is flashing. Press the up/down
or to set the minutes to "30". The minute
, after 5 seconds the settings are automatically saved. The
, at this time, WEEK "6" is hidden and the "ST" temperature
or
, WEEK "6" is hidden and the "ST" temperature display is
or
. The LCD screen will light up.
or to adjust WEEK "1"
or to set the
or to set the
to set "ST" temperature.
to set the temperature. After setting
again within 5 seconds (the
EN
21