EWT MaxiHC B/W Mode D'emploi page 9

Runback Timer
The heater is fitted with a Runback Timer feature which can be set in either cooling or
heating modes. The Runback Timer range is 1 to 12 hours. To set Runback Timer please follow
the directions below:
Has Runback Timer been set previously?
NO
Press to set Runback Timer.
• After pressing Runback Timer, icon will
flash for 6 seconds. After 6 seconds the
Runback Timer period will be set.
Icon will be on solid while
Runback Timer is active.
Has Runback Timer been set previously?
YES
Current Runback Timer:
Runback button can be pressed to view
remaining time of Runback Timer. The
Runback Timer can be edited or if left alone
for 6 seconds will continue in its runback and
return to the main screen.
Cancelling Runback Timer:
To cancel the runback timer the user can
go back into runback settings and change
the runback time to 0 or press the Standby
button.
Decrease Runback
time (stops at 0hr)
RUNBACK TIMER SET
Cancel Runback
Timer
Increase Runback time
Cancel Runback
Icons will be flashing while setting
Runback Timer
Decrease Runback time to 0 to
cancel Runback Timer
Increase Runback
time (stops at 12hr)
Increase Runback
time
Press Runback Timer
button to cycle to 0
to Cancel Runback
Timer