Qr And Barcode Labels - Epson LABELWORKS LW-600P Guide Rapide

QR and barcode labels

The Label Editor software can create barcode
labels in a variety of formats. These barcodes
can be used for inventory management and
asset tagging.
The following barcode formats are available:
EAN-8, EAN-13, CODE128, CODE39, QR
CODE, ITF, CODABAR, UPC-A, UPC-E.
Note: Epson recommends the 1-inch wide tape
for printing QR codes and barcodes.
1. Click Barcode or QR code.
14 | Special Labels
2. Enter the data in the Code field and click
OK.
3. Click the location where you want to
place the barcode.
4. Click outside of the label to set the
barcode in place.
5. Click Print.