auna 10032299 Mode D'emploi page 38

6. Press and hold the
Tap "Next" to conintue.
< <
PRESS TO ENTER SETUP M... PRESS TO ENTER SETUP M...
Press and hold the WPS key on Press and hold the WPS key on
2 2
device to put the device into device to put the device into
network setup mode. Then click network setup mode. Then click
the "Next" button to continue. the "Next" button to continue.
Next Next
8. When the speaker is
connected to the network
successfully, the Mode
Indicator will stay lit.
CONNECTED
Device is connected to XXXX
successfully
Current Wi-Fi strength of device:100%
Next
7. There will be voice instructing
WPS.
during the connecting process.
<
3 3
Wait for device to be connected
to Wi-Fi...
Do not operate the device during Wi-Fi Do not operate the device during Wi-Fi
setup. Please wait for completion of setup. Please wait for completion of
setup patiently. It's usually finished in setup patiently. It's usually finished in
60 seconds. 60 seconds.
If you hear voice prompt for erro message. If you hear voice prompt for erro message.
please go back and retry please go back and retry
Note 1:
If the connection fails, the
following page will appear
Then tap the "Cancel" Button
to reconnect as the on screen
instructions.
Try Next to try an alternate way of
<
PLEASE WAIT PLEASE WAIT
Wait for device to be connected
to Wi-Fi...
Cancel Cancel
WI-FI SETUP TIMEOUT
UH OH!
connecting.
Next
Cancel Setup
EN
39