First-Time Setup - auna Connect Link Mode D'emploi

EN
Press /MODE on the device or press on the remote control to switch
to standby mode. The time, date and any active alarm times appear on the
screen. Switch on with the same button.
When album cover is displayed on the playing screen, press OK to view
(SCAN)
the full screen size of the picture. (This feature may need software update,
contact us if required.)
Presets
Presets are stored in the radio and cannot be accessed from other radios.
To store an Internet radio preset, press and hold FAV until the display shows
the Save preset screen. Select one of the 10 presets to save the currently
playing station.
Shortcut to preset store 1-10 favourate stations by directly pressing and hold
numbers directly on the remote control.
To select a preset, press FAV , then select one of the listed preset stations.
When a preset station is playing, it shows n ( 1, 2 etc) at the bottom
  
of the screen. Shortcut to preset recall 1-10 favourate stations by directly
pressing numbers "1-10/0" directly on the remote control.
Now playing information
While stream/DAB/FM is playing, the screen shows some information
about the station, press INFO to view.
The device may process large amount of data after a period of operation,
no matter in which mode, it will cause the system freeze or malfunction.
Reboot the device if necessary.

First-time Setup

When powering the device on for the first time, it displays information of
privacy policy. Press OK to continue. Then a setup wizard appears for
(SCAN)
helping you setup the main use of the device.
Select "YES" and confirm your selection and launch the setup wizard.
If you select "NO", the next window will ask you choose if you want to start
the setup wizard again next time you power the device on.
Setup wizard helps you setup the main use of the device.
Selecting the menu language - Rotate the knob to select the menu
language you want from the list and press OK to confirm.
(SCAN)
Setting date and time - Select "12" for 12-hour display format or "24" for
24-hour display format. If you select the 12-hour format, the display shows
36