Focal SIB EVO Manuel D'utilisation page 15

SIB EVO - SIB EVO DOLBY ATMOS®
User Manual
F - Audio/video amplifier settings:
We highly recommend configuring your Sib loudspeakers in "SMALL" mode in your audio/video
amplifier menu.
Recommendations:
If your amplifier is equipped with an auto-calibration function, make sure that your amplifier has the
latest firmware.
If you configure the amplifier manually, we highly recommend:
- setting the cut-off frequency to 80Hz.
- doubling the distance of the Atmos® loudspeakers compared to the front speaker drivers.
- increasing the level until you obtain the desired result.
G - Subwoofer
For reproducing low frequencies, we recommend Cub Evo subwoofer.
H - Break-in period
The speaker drivers used in Sib Evo loudspeakers are complex mechanical components which require
a break-in period in order to operate at their best and to become acclimatised to the temperature and
humidity of your environment. The length of time this takes can vary depending on the conditions and
may extend over several weeks.
To reduce this break-in period, we recommend operating your subwoofer for about 20 consecutive
hours at medium volume, with music which is rich in bass. Once the loudspeaker's characteristics have
totally stabilised, you will be able to enjoy the full potential of your loudspeakers.
I - Maintenance
Only clean Sib Evo loudspeakers with a dry microfibre cloth. If a loudspeaker is dirty, we recommend
simply cleaning it with a damp microfibre cloth.
Never use solvents, detergents, alcohol-based or corrosive products, scrapers or scourers to clean the
surface of the loudspeaker. Only wipe delicately and never press down hard.
15