Hitachi RAR-6NE2 Manuel page 30

O P E R T A O I N M
The remote controller can be set to fix the HEATING mode (including FAN), COOLING mode (including FAN)
and DEHUMIDIFYING mode (including FAN) operations.
Press
when the remote controller is OFF.
"
will remain.
This indicates that HEATING mode operation is locked.
When pressing
Press
when the remote controller is OFF.
All operation mode symbols will appear on the display for about 10 seconds. After
that, operation mode symbol before cancellation will be displayed.
This indicates that HEATING mode operation is unlocked.
Press
seconds when the remote controller is OFF.
"
"
This indicates that COOLING and DEHUMIDIFYING mode operation is locked.
When pressing
displayed.
Press
seconds when the remote controller is OFF.
All operation mode symbols will appear on the display for about 10 seconds. After
that, operation mode symbol before cancellation will be displayed.
This indicates that COOLING and DEHUMIDIFYING modes operation is unlocked.
NOTE
Operation Mode Lock function will not activate if TIMER reservations activate.
TIMER reservations shall be deactivated first. Then, Operation Mode Lock function can be activated.
HEATING, COOLING and DEHUMIDIFYING mode (including FAN) operations can be unlocked by pressing
the (RESET) button. However, by pressing the
in the remote controller will disappear. You may need to set the necessary information again.
O D E L O C K
Method to lock HEATING mode (including FAN) operation.
(ECO) and (POWERFUL) buttons simultaneously for about 5 seconds
", " " and " " will be displayed for about 10 seconds. Later, "
(MODE) button, "
Method to unlock HEATING mode (including FAN) operation.
(ECO) and (POWERFUL) buttons simultaneously for about 5 seconds
Method to lock COOLING and DEHUMIDIFYING modes (including FAN)
operations.
(ECO) and (LIGHT ON / OFF) buttons simultaneously for about 5
", " ", " " and " " will be displayed for about 10 seconds. Later, "
" will remain.
(MODE) button, "
Method to unlock COOLING and DEHUMIDIFYING modes (including FAN)
operations.
(ECO) and (LIGHT ON / OFF) buttons simultaneously for about 5
- 30 -
", " " or " " will be displayed.
", " ", " " or "
(RESET) button, all the information stored
" and " "
" and
" will be