hestan KDW Série Manuel D'entretien page 13

FEATURES AND CONTROLS
Only run the soak program with half loads.
To run programmes 6, 7, 8, 9, 10select the required standard program and
then press the quick time option button
After using the above tables to choose the most suitable washing cycle, program
the appliance.
Before starting a washing program, make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser (to add detergent, see the instructions on page
• The spray arms are able to rotate freely and without obstruction.
• The racks have been correctly loaded (see the instructions on
page 24-28).
• The dishwasher door is securely closed.
Information displayed
Scheduled program duration
Remaining program time
Delayed start : 1 – 24 hours
Error message: Err
TURNING ON THE DISHWASHER
Press the on/off button to start the dishwasher. Then wait for one
of the program indicator lights to turn on.
SELECTING AND STARTING A PROGRAM
INFORMATION DISPLAY
(continued)
©2018 Hestan Commercial Corporation
22 ).
11