Function Buttons - Honeywell CL30XC Série Mode D'emploi

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS

POWER
Press the button to turn the unit on. The cooler will start automatically at medium speed.
After a few seconds the speed will switch to low. To turn the unit off, press the button again.
SPEED
Press the SPEED button repeatedly to change the speed between High - Medium - Low.
COOL
Press the COOL button until is illuminated on the display screen. This activates evaporative
cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling
Media is completely wet. When the is not illuminated on the display screen, the unit switches to a
fan only mode, without evaporative cooling.
WARNING: Please ensure sufficient water is in the water tank otherwise you may hear a Low Water
Alarm and the cooler will start in a Fan only mode without evaporative cooling.
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to
8 hours of use.
SLEEP
Press the SLEEP button until is illuminated on the display screen. When the SLEEP mode is
selected, the fan will run on High for one hour, then Medium for the second hour and on Low speed
from the third hour onwards until you switch off the unit.
SWING
Press the SWING button until is illuminated on the display.
The louvers will begin to move left to right automatically.
Vertical Air Flow - You can manually adjust the louvers to
change vertical air flow.
Louver
Movement
EN 3