Function Buttons - Honeywell TC10PE Série Mode D'emploi

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS

POWER
Press the button to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
SPEED
button repeatedly to change the speed between | - || - |||.
Press the SPEED
SWING
Press the SWING button until is illuminated on the display. The louvers will
begin to move left to right automatically. You can manually adjust the louvers
to change vertical air flow.
Louver
Movement
COOL
You must add water before operating the unit in Cool mode. Press the button until
is illuminated on the display screen. The water pump will operate and you will feel the cooler air after
the Honeycomb Cooling Media is completely wet.
EN 3