Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Battery Replacement
To replace the battery contact the store where the appliance was purchased.
The battery needs to be replaced when: a. running time is shorter
Notice:
1.
The vacuum must be turned off before removing the battery.
2.
Do not use or store in locations where the temperature is lower than 5°C or
higher than 40°C.
3.
Remove the battery before dispose the appliance.
4.
The appliance must be serviced or repaired by a specialized technician.
Battery recycling/disposal: Batteries consume important quantities of natural
resources, thus they should be recycled.
b. Longer charging time
Press the battery release button
Take out the battery
Docking Station
Screw holes
≥15 cm
120~125 cm
≤80 cm
Floor
≈5 cm
Floor
Floor
6*30mm expansion pin
Tips: When installing the docking station, 4*30 mm screw is suggested on the
wooden surface. The 6*30 mm expansion pin and 4*30 mm screw should be used
on the cement surface.
≈5 cm
Floor
62 | 63
GB
1. Installation diagram
3
2. Fix on the wall
3. Hanging the product
& accessory
Floor
Publicité
Table des Matières
