YTORA TPW799 Mode D'emploi page 8

INFORMATION:
The clock automatically changes from set-up mode to time display mode if no keys are
•
pressed for 20 seconds.
Explanation for the time zone display:
•
You can manually adjust the clock to the time zone of a country (up to 1500 km distance to
Frankfurt/Main) where the clock receives the DCF77 signal but where the actual time
differs from the time received.
If, e.g. the time in a given country is 1 hour ahead of the German time, set the time zone
display to 01. The clock is now DCF77 controlled but the time is one hour ahead.
Daily alarm set-up
Press "MODE" to switch from time display to A1 display
•
Press and hold the key "MODE" for 3 seconds, the flashing alarm time are shown
•
The hour display of the alarm time is flashing. Use "+" and "-" to select the hour. Press
•
"MODE" to confirm.
Then follow the minutes. Use "+" and "-" to select the minutes, Press "MODE" to confirm.
•
The same setting as for A2.
•
Daily alarm on/off
1st press "ALARM" to activate the alarm 1 with alarm symbol showing.
•
nd
2 press "ALARM" cancel the alarm 1, then activate the alarm 2 with alarm symbol
•
showing
rd
3 press "ALARM" to activate the alarm 1 and alarm 2 with alarm symbol showing.
•
th
4 press "ALARM" cancel all the alarms
•
INFORMATION:
The clock automatically changes from set-up mode to time mode if no keys are pressed for
•
20 seconds.
The alarm sounds for 2 minutes if no key is pressed to stop it.
•
Snooze function
To activate the snooze function, follow the steps below
Press the key "SNOOZE/LIGHT", while the alarm sounds, to activate the snooze function.
•
If the snooze function is activated, alarm symbol is flashing.
•
The alarm repeat after 5 minutes.
•
The snooze function can be stopped by pressing any key (except the
•
"SNOOZE/LIGHT"key).
12/24 hours mode
The time display can be in 12 (AM/PM) or 24 hours mode, please follow the manual set-up to
select
°C/°F temperature display
The temperature display can be in °C or °F, please follow the manual set-up to select.