Bresser TempTrend Mode D'emploi page 27

HOW TO CHECK REMOTE AND
INDOOR TEMPERATURES
The indoors temperature is shown on the second line of
the display. The outdoors temperature is shown on the top
line of the display. The wave display on the outdoors
temperature indica tes the reception of the remote unit is
in good order. If no readings are received from the remote
unit for more than two minutes, blanks "
displayed until further readings are successfully searched.
Check the remote unit is sound and secure. You can wait
for a little while or Hold [
immediate search. If the temperature goes above or below
than the temperature measuring range of the main unit or
the remote unit (stated in specification), the display
will show "
HOW TO READ THE KINETIC WAVE DISPLAY
The kinetic wave display shows the signal receiving
status of the main unit. There are three possible forms:
The unit is in searching mode.
Temperature readings are
securely registered.
No signals.
Weather Forecast
This unit is capable of detecting atmospheric pressure
changes. Based on collected date it can predict the
weather for the forthcoming 12 to 24 hours.
Display
Forecast Sunny
"
Slightly
Cloudy
27
] for 2 seconds to enforce an
Cloudy
GB/IE
" will be
Rainy Snowy