Axis Communications 5570e IPDS SNA Guide D'installation page 9

AXIS 5570e Installation Guide
Assign an IP address
You can set the IP address of your print server using one of the following methods, depending on your network
operating environment:
Automatic IP Address Assignment
Method Server required
DHCP DHCP server
RARP RARP server
BOOTP BOOTP server
AutoIP No server required.
AXIS AddPrinter
Wizard
Manual IP Address Assignment
Method
arp/ping
AXIS AddPrinter
Wizard
AXIS ThinWizard
Platform Comment
Requires the IP address for each device to be
Windows downloaded individually. Cannot be used over
routers.
You must define the Default Router and Subnet
Mask. Log in to the print server's Web pages
and select Admin | Network Settings |
UNIX/Mac OS X
Detailed View | TCP/IP | Default Router and
Subnet Mask. DHCP, Auto-IP, BOOTP and RARP
must first be set to No
Axis software that allows you to find print
Windows servers in your network and assign an IP
address to them.
Axis software that assists in setting the IP
address of multiple print servers. This software
Windows 2000/XP
is recommended for large organizations and
enerprise networks.
Comment
Dynamic assignment of IP addresses. See Automatic IP Address Assignment
using DHCP, on page 10
Static assignment of I P adresses. Cannot be used over routers. See
Automatic IP Address Assignment using DHCP, on page 10
Static assignment of IP addresses. See Automatic IP Address Assignment
using DHCP, on page 10
Automatic assignment of IP addresses in Windows environments.
See Automatic IP Address Assignment using DHCP, on page 10
Installing printers using AXIS AddPrinter, on page 18
Page 9
See
Setting the IP address
manually using ARP/Ping,
on page 11
Setting the IP address
manually using ARP/Ping,
on page 11
Installing printers using
AXIS AddPrinter, on page 18
Print Server Management
using AXIS ThinWizard, on
page 33