Setup And Configuration - Axis Communications 5570e IPDS SNA Guide D'installation

Page 8

Setup and Configuration

1. Start out with setting an IP address on the print server, described in Assign an IP address, on page 9.
2. Refer to the table below to determine which setup procedures that are relevant to your network environment.
Environment Data Stream
SCS / IPDS
SCS
AS/400
IPDS
SCS / IPDS
IBM
Mainframe
IPDS
NetWare
Windows
Macintosh
UNIX
Network Configuration Actions
SNA See the AXIS 5570e User's Manual for further details.
TN5250E (TCP/IP) AS/400 TN5250E Printing (SCS over IP), on page 13
AS/400 or Mainframe IPDS over PPR/PPD Printing, on
PPR/PPD (TCP/IP)
page 15
SNA See the AXIS 5570e User's Manual for further details.
TN3270E (TCP/IP) See the AXIS 5570e User's Manual for further details
AS/400 or Mainframe IPDS over PPR/PPD Printing, on
PPR/PPD (TCP/IP)
page 15
TCP/IP and IPX/SPX Setup for NetWare, on page 24
TCP/IP,
Setup for Windows, on page 18
NetBIOS/NetBEUI
TCP/IP, AppleTalk Setup for Macintosh, on page 30
TCP/IP Setup for UNIX, on page 31
AXIS 5570e Installation Guide