Axis Communications 5570e IPDS SNA Guide D'installation page 16

Page 16
4. Verify the communication between the AXIS 5570e and the IBM Mainframe, by pinging the AXIS 5570e from
the host.
5. Define the AXIS 5570e as a writer-controlled printer to JES2 or to JES3.
JES2 Example:
FSS (FSS1) PROC=SAMPPROC,HASPFSSM=HASPFSSM,
PRT1 FSS=FSS1,MODE=FSS,PRMODE=(LINE, PAGE,),
CLASS=C,UCS=0,SEP=NO,SEPDS=NO,CKPTPAGE=100,
START=YES,MARK=NO,TRKCELL=YES
JES3(using JNAME=PRT1) Example:
FSSDEF,TYPE=WTR,FSSNAME=FSS3,PNAME=SAMPPRO3,SYSTEM=SYS1, TERM=NO
DEVICE,DTYPE=PRTAFP1,JNAME=PRT1,JUNIT=(,SYS1,,ON),FSSNAME=FSS3,
MODE=FSS,PM=(LINE,PAGE,),CHARS=(YES,GT12),
CARRIAGE=(TES,A868),CKPNTPG=100,HEADER=YES,WC=(C)
6. Define the printer to PSF with a
For a more comprehensive description of the setup procedures, refer to the AXIS 5570e User's Manual on
www.axis.com.
Configuring the AXIS 5570e
Follow the instructions below to configure your AXIS 5570e for AS/400 or Mainframe IPDS over PPR/PPD printing
using a standard Web browser:
1. Start a Web browser and enter the IP address or the host name of the AXIS 5570e in the location field. Press
Enter.
The internal Web pages of the AXIS 5570e will appear.
Note:
To protect the admin pages and the Configuration Wizard from unauthorized use, enter a password (by
default set to pass) in the Root Password field under Admin | General Settings.
statement, including the IP address and port number.
PRINTDEV
AXIS 5570e Installation Guide