Axis Communications 5570e IPDS SNA Guide D'installation page 21

AXIS 5570e Installation Guide
1. Go to Start | Settings | Printers and click the Add Printer icon to start the Add Printer Wizard. Click Next.
2. Select Local Printer attached to this computer.
Make sure the Automatically detect and install my Plug and Play printer check box is not checked. Click
Next.
Click the Create a new port radio button and select Standard TCP/IP Port from the list.
3.
Click Next and the Add Standard TCP/IP Printer Port Wizard starts.
Click Next.
4. Enter the IP address of the print server
(Example: 192.168.3.191).
The Port name field will be filled in
automatically when you enter the IP address,
but you should add the port you want to use as
a suffix to the IP address:
Add _LPT2 for the USB port.
Add _LPT1 for the parallel port..
Click Next.
Enter the Device Port you want to use:
5.
choose LPT2 for the USB port* and LPT1 for
the parallel port.
Click Next.
Select Manufacturer and Printer from the
6.
lists. Click Next. If you already have the
printer's driver installed, you will be asked
whether to keep it or to replace it. Click Next.
Supply a name for the printer and choose
whether you want to make it your default
printer. Click Next.
7. Choose whether you want to share the
printer with other network users, print a test
page, etc. Select the appropriate radio button
and click Next and Finish.
Page 21