Axis Communications 5570e IPDS SNA Guide D'installation page 33

AXIS 5570e Installation Guide
2. You may be prompted for a password.
The default user name is root and the default password is pass.
Notes:.
• It is highly recommended that the default password is changed to prevent unauthorized access to the print
server's configuration pages. This is done from the Admin | General Settings | General tab in the Root Password
field.
You can address the print server's Web interface in the secure way, i.e. via https://
•
To do this you must enable the SSL/TLS protocols in the Web interface: Admin | Network Settings | Detailed
View| TCP/IP and set the HTTPS Enabled parameter to Yes (you must have a valid certificate loaded).
If you do not have a valid certificate loaded, select Admin | Security Settings and click Create.
Print Server Management using AXIS ThinWizard
AXIS ThinWizard allows you to manage and upgrade multiple Axis products. You can find, install, monitor,
configure and upgrade your Axis print servers remotely in any TCP/IP network using a standard Web browser.
AXIS 5570e require AXIS ThinWizard 3.04 and up.
Install AXIS ThinWizard:
AXIS ThinWizard 3.0 and up is Windows 2000, XP and Vista compatible, and is available free of charge on
www.axis.com. Install AXIS ThinWizard on a designated computer on your network. When you want to use AXIS
ThinWizard for management purposes, you can access it via any standard Web browser. To install, follow the
instructions in the Installation Wizard. During the installation, you will be asked to enter a user id and a password.
These will be used when logging in to AXIS ThinWizard, please take a note of them.
root
pass
Page 33