Antenna Connection - LG UB80 Série Manuel D'utilisation

Image shown may differ from your TV.
1 Gather and bind the cables with the Cable
Holder and the Cable Management.
2 Fix the Cable Management firmly to the TV.
(Only UB80**, UB82**, UB83**)
Gather and bind the cables with the Cable
Holder.
(Only UF695*)
Do not move the TV by holding the cable
holder, as the cable holder may break, and
injuries and damage to the TV may occur.
SETTING UP THE TV / MAKING CONNECTIONS
This section on MAKING CONNECTIONS mainly
uses diagrams for the UB83**-ZB models.

Antenna connection

Connect the TV to a wall antenna socket with an
RF cable (75 ).
Use a signal splitter to use more than 2
TVs.
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
An antenna cable and converter are not
supplied.
Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
This TV cannot receive ULTRA HD
(3840 x 2160 pixels) broadcasts directly
because the related standards have not
been confirmed.
IN
ANTENNA /
CABLE