Tv Tuner - NEC MultiSync SC40 Mode D'emploi

CoLor SYStEM
ViDEo input only
auto
ntSC
PaL
SECaM
4.43ntSC
PaL-60
SCan MoDE
HDMi, DVD/HD, ViDEo, tV
input only
oVEr SCan
unDEr SCan
aDVanCED oPtion rESEt resets the following settings within the aDVanCED oPtion menu back to factory set-
FaCtorY rESEt

tV tunEr

not all models have
tuning BanD
the Digital tuner
CHECK DtV SignaL
installed.
CHannEL SEarCH
aDD on CHannEL
SEarCH
FinE tuning
CHannEL EDit
CHannEL LaBELS
ConFiguration
MEnu LanguagE
tiME ZonE
PaSSWorD SEt
ParEntaL ControL
ParEntaL
ControL MEnu
aDVanCED
rating
CLoSED CaPtion
oPtionS
rESoLution
auDio
auDio LanguagE
DigitaL auDio
outPut
Denotes Optional Digital Tuner function.
the selected Color System depends on the video format of the input signal.
automatically chooses Color System setting based on input signal.
Some video formats may require scan conversion in order to best display the image.
image size is larger than what can be displayed. the image edge will appear cropped.
approximately 95% of the image will be shown on the screen
image size stays within the display area. the whole image is displayed on the screen.
ting: inPut DEtECt, Long CaBLE on/oFF, Long CaBLE ManuaL, DVi MoDE, SCan ConVEr-
Sion, S-ViDEo MoDE, SCan MoDE.
resets oSD options back to factory settings EXCEPt For: CHangE SECuritY PaSS-
WorD and SECuritY PaSSWorD.
tunEr
Choose air or Cable as tV source.
Shows the status of the Digital tV signal.
Searches for tV channels and stores them in memory.
Searches for tV channels and stores them in memory without erasing previously
stored channels.
Performs fine adjustments to analog channels.
add or remove channels stored in memory.
add a label to the channel.
Set the Parental Control Password. Factory default password is 0000.
Parents can choose to block types of programming based on rating and content.
Downloadable rating, depending on broadcast. Press SEt to change setting.
notE: Closed captioning settings can not be adjusted for the ViDEo/S-ViDEo inputs.
auto is is the only option available for these inputs.
Set the displayed image to the desired resolution.
Choose the language of audio output.
Select the digital audio output source. Choose Dolby D/PCM/oFF.
OSD Controls
English-31
- continued