Field Of Application - WAGNER FURNO F100 Traduction Du Mode D'emploi Original

GB
device. Cleaning and user maintenance must not be carried out by children without
supervision.
• The heat gun and paint become very hot. Wear safety gloves and safety goggles while
working to avoid burns.
• Do not direct the hot air flow towards people or animals.
• Do not use the Heat Gun as a hair dryer.
ATTENTION! When paint is heated, harmful gases and vapours may
develop. Always wear suitable respiratory protection and ensure adequate
ventilation of the work space.
• Old layers of paint may contain lead. Paint containing lead must not be removed
with a heat gun. If in doubt, have the paint checked by an expert.
• Before every use, check the electrical tool, cable and plug. Do not use the electrical
tool if it is damaged. Do not open the electrical tool yourself and only have it repaired
by qualified specialist personnel using original spare parts.
• Do not misuse the power cord to carry the power tool, hang up the power tool or
pull the plug out of the socket. Keep the power cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled power cords increase the risk of an electric
shock.
• If the power cord is damaged, it must be replaced by the manufacturer or it's service
agent or a similarly qualified person in order to avoid a safety hazard.
• Keep power tools away from rain or moisture. Water penetrating into a power tool
increases the risk of an electric shock.
• If the power tool must be used in a moist environment, use a ground fault circuit
interrupter. Using a residual current operated circuit-breaker avoids the risk of electric
shock.
• Only use suitable extension cables that are fully intact. A harmonised H05RR-F 3 x
1.0sq mm rubber type cord is required as a minimum for general use.
• Always disconnect the Heat Gun from the power supply when not in use.
• Store the heat gun in a dry location out of the reach of children.
• Keep your workplace clean and well lit.
• Do not over-reach, especially when working on ladders.
• Never use to thaw frozen pipes located inside walls or near combustibles.

3. Field of application

The F100 offers a variety of possible uses:
•
softening of paint, sealing compound and window putty for easier removal
•
softening of adhesives for the removal of stickers and floor tiles
•
shrinking of plastic film for packaging
•
working with shrink hoses
•
handicrafts (e.g. embossing)
12
Furno F100