Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
A
B
1. Power off and unplug the washer from
the electrical outlet.
2. Gently press the top area of the filter
cover to open.
3. Put an empty, spacious container
around the cover, and stretch the
emergency drain tube to the container
while holding the tube cap (A).
4. Open the tube cap and let water in the
Emergency drain tube (B) flow into the
container.
5. When done, close the tube cap, and
reinsert the tube. Then, close the filter
cover.
NOTE
Use a spacious container because the
water in the drum may be more than
expected.
English 43