Snooze Function - Alecto AK-30 Guide De L'utilisateur

Masquer les pouces Voir aussi pour AK-30:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To stop the wake-up signal:
As soon as the wake-up time is reached, the clock will sound
an alarm signal. For the first 10 seconds the alarm signal has a
slow rhythm.
In between 10 and 20 seconds the rhythm of the alarm signal
increases. From 20 to 30 seconds the rhythm is even faster and
as of 30 seconds the alarm signal has the fastest rhythm. The
wake-up signal continues for up to 120 seconds.
Within those 120 seconds, press the "+" or "MODE" button to
switch off the alarm clock. After 24 hours, according to the set
wake-up time, the alarm signal will sound again.
You may also set the slider at the right to "OFF" to fully switch
off the alarm clock.

Snooze function:

Press the snooze button "
" on top of the clock to stop the
alarm signal and enable the snoozemode. The snooze icon Z
Z
starts flashing.
When the snooze mode is activated, the alarm signal will sound
again after 5 minutes. You may activate the snooze function up
to 7 times in a row.
To stop the alarm signal:
While the alarm signal sounds, set the slider(s) to "OFF" to
stop the alarm signal, and the wake-up time is replaced by the
temperature display.
The alarm clock is now disabled.
-30-

Publicité

Table des Matières
loading

Table des Matières