Technical Data; Intended Use; Battery Powered Operation - Würth WLA 18.0 COMPACT Traduction Des Instructions De Service D'origine

Art.
Number of LEDs.
Lithium ion battery pack * (Art. 0700 916 532/-535/-536)
Quick-charger * (Art. 0700 816)
Lamp luminous flux
Operating voltage (Power supply unit Art. 0827 981 181)
LED lifetime
Protection category
Protection class
Storage temperature (without battery pack)
Operating temperature
Dimensions in mm (H x B x D)
Weight
* Not supplied

Intended Use

The lamp is for illumination of a work area and
must only be used in a dry environment. The lamp is
designed for use with genuine Würth system acces-
sories. Any other use or use outside this scope is
considered an improper use.
The user is solely responsible for damage
resulting from improper use.
Operation

Battery powered operation

Insert the charged
■
LI-CV-18 V/4,0 Ah/5,0 Ah/6,0 Ah
(Art. 0700 916 532/-535/-536) in the lamp.
Note
The power remaining in the battery pack
can be displayed by pressing the battery
power indicator that is integrated in the
battery pack.
If the battery pack is discharged, remove and
■
recharge using the quick-charger AL30-CV-LI
Art. 0700 816.

Technical Data

0827 981 170
1 x 10 W LED array 2 x 10 W LED arrays
315 x 118 x 145
The battery pack cannot be charged via the
optional 230 V power supply unit!
Operation using the optional power
supply unit
The lamp can also be operated via the optional 230
V power supply unit Art. 0827 981 181. When
doing so, there must also be no battery pack in the
lamp. The connection socket, including the protec-
tive cap, for connection of the power supply unit is
located in the side cover of the lamp (next to the
rotary switch).
Remove the protective cap of the connection
■
socket by turning in an anticlockwise direction.
Connect the connecting cable of the power
■
supply unit to the lamp connection socket.
Turn the union nut manually until it is hand-tight
■
to ensure a fixed contact.
Connect the power supply unit to a 230 V
■
earthed power outlet.
After removing the power supply unit, screw the
■
protective cap back on to the connecting socket.
0827 981 180
LI-CV 18 V/4,0 Ah/5,0 Ah/6,0 Ah
AL30-CV-LI
1,200 lumen
230 V / 50 Hz
Up to 40,000 hours
IP20
III /
-20°C to +70°C
0°C to +40°C
428 x 118 x 145
1,020 kg
Note
Please observe the original operating in-
structions of the quick-charger AL30-CV-LI.
Attention!
2,200 lumen
1,390 kg
7