1.
Touch the Ice key on the control panel to
turn off the automatic ice maker.
2.
Remove the crisper drawers to access
the water filter.
3.
Pull out on the right side of the water
filter gently until it stops.
4.
Remove the water filter by pulling it
outward. It is normal for a few drops of
water to drip after the filter has been
removed.
5.
Remove the plastic wrap from the
outside of the new filter.
Care and Cleaning
6.
7.
8.
9.
10. Touch and hold the Key Lock key for
Lighting
The appliance lighting is not user
serviceable. Do not tamper with the
lighting in any manner. Contact a
qualified service technician for repair.
Moving
1. Unplug the appliance before
2. Disconnect the water connections.
3. Secure the shelves, accessories,
19
Insert the water filter into the mechanism
and push back on the right side to lock it
in place.
Install the crisper drawers.
Connect the power plug to the electrical
outlet.
Touch the Ice key on the control panel to
turn on the ice maker.
3 seconds to reset the filter change
indicator light.
transporting it.
crisper drawers, etc. inside the
refrigerator with adhesive tape during
transport.