First Starting; Programme End - Candy RO 14104DWME/1-S Mode D'emploi

WARNING:
Don't touch the buttons while inserting
the plug because
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn't work property. In
this case, remove the plug and repeat
the operation.
SMART RING (ring for selecting
programmes)
l
When the SMART RING is turned, the
appliance will be turned on and the
display will show the description and
parameters of the selected programme.
l
At the end of the cycle, remember to
switch off the appliance by turning the
SMART RING to the OFF position, then
unplug the appliance and turn off the
water supply.

First starting

- Language setting
l
After connecting the machine to the
network and turning it on, press the
STEAM or DELAY START button
display the available languages.
l
Select the desired language pressing the
PLAY/PAUSE button.
- Change the language
If you want to change the setting language
you will have to press simultaneously
STEAM and DELAY START buttons for
about 3 seconds. ENGLISH will appear on
the display, and you will be able to choose
a new language.
PLAY/PAUSE button
Close the porthole BEFORE pressing
the PLAY/PAUSE button.
the machines
to
67
l
To start the selected cycle with the preset
parameters, press PLAY/PAUSE. When
the programme is running, the display will
show the time to elapse.
l
Moreover, If you want to modify the
chosen program,
options buttons,
parameters and
PAUSE button to start the cycle.
Only the options compatible with the
set programme can be selected.
l
After switching on the appliance, wait a
few seconds for the programme to start
running.
PROGRAMME DURATION
l
When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
l
Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
l
The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.

PROGRAMME END

l
"END" will appear in the display at the
end of the program and the DOOR
LOCKED light will go off, it is now
possible to open the door.
l
At the end of the cycle, turn off the
washing machine by turning the SMART
RING to the OFF position.
The SMART RING must ALWAYS be
put in the OFF position at the end of
the washing cycle before you can
select a new washing cycle.
press the desired
modify the default
then press PLAY/