General Information - Baume & Mercier AUTOMATIC Mode D'emploi

Rapid date change
1. Pull the crown to Position 2.
2. Turn the crown to advance the date (E) chronologically, until the desired date appears.
3. Reset the crown to Position 1.
For months with less than 31 days, the date must be changed manually at the end of the month.
CHRONOGRAPH FUNCTION
Simple chronograph
A chronograph is a watch which can measure and display time intervals. A chronograph model generally
contains a central seconds-hand for counting seconds, a counter for totaling minutes and another for
totaling hours.
P1: Start/stop push-button. Press once to start the chronograph (F=seconds, G=minutes). Press a second
time to stop and a third time to start the chronograph again.
P2: Reset push-button. Once the chronograph has been stopped by pressing the P1 push-button, press
the P2 to reset all counters to zero.

GENERAL INFORMATION

Care recommendations
Your Baume & Mercier watch was both designed and manufactured with great care. Please read our
recommendations for use and care on www.baume-et-mercier.com.
International warranty
Your Baume & Mercier watch is covered by the Baume & Mercier International Warranty.
The conditions of the Baume & Mercier International Warranty are available on www.baume-et-
mercier.com/customer-service/warranty.html.
Other information
If you have any questions, please visit our website www.baume-et-mercier.com.
You can also contact our authorized retailers in your country (list available on our website www.baume-
et-mercier.com) or contact us directly via our website using the contact form or by calling one of our
Client Relations Centers (www.baume-et-mercier.com/customer-service/contact-us.html).
Setting procedure – Automatic - hour, minute, small seconds, date, chronograph 5